Turkmenistan 45° Elbow

A 45° elbow is a type of pipe fitting that is used to change the direction of the flow of a piping system by 45 degrees.

Category:

TurkmenistanButt Weld Pipe Fittings

sales@enfipipe.com

A 45° elbow is a type of pipe fitting that is used to change the direction of the flow of a piping system by 45 degrees. This type of elbow is commonly used in plumbing and HVAC systems to connect pipes at a slight angle, allowing for a more efficient flow of liquids or gases.

One of the main advantages of a 45° elbow is its versatility. It can be used in a variety of applications, from simple household plumbing to large industrial systems. Its compact size also makes it easy to install in tight spaces where a larger elbow would not fit. Additionally, the smooth inner surface of the elbow helps to reduce friction and turbulence in the flow of fluids, resulting in less pressure drop and improved system performance.

In conclusion, the 45° elbow is an essential component in many piping systems, providing a convenient and efficient way to change the direction of flow. Its versatility, compact size, and smooth inner surface make it a popular choice for a wide range of applications. Whether you are a professional plumber or a DIY enthusiast, the 45° elbow is a reliable and effective solution for your piping needs.

Nominal diameter	End outer diameter	Center to end face			Center to center		Back to section
		45° elbow	90°elbow		180°elbow
		H	F		P		K
		Long radius	Long radius	Short radius	Long radius	Short radius	Long radius	Short radius
1/2	21.3	15.7	38.1	-	76.2	-	47.8	-
3/4	26.7	19.1	38.1	-	76.2	-	50.8	-
1	33.4	22.4	38.1	25.4	76.2	50.8	55.6	41.1
1	42.2	25.4	47.8	31.8	95.3	63.6	59.9	52.3
1	48.3	28.4	57.2	38.1	114.3	76.2	82.6	62
2	60.3	35.1	76.2	50.8	152.4	101.6	106.6	81
2	73	44.5	95.3	63.5	190.5	127	131.8	100.1
3	88.9	50.8	114.3	76.2	228.6	152.4	158.8	120.7
3	101.6	57.2	133.4	88.9	266.7	177.8	184.2	139.7
4	114.3	63.5	152.4	101.6	304.8	203.2	209.6	158.8
5	141.3	79.2	190.5	127	381	254	261.9	196.9
6	168.3	95.3	228.6	152.4	457.2	304.8	3127	236.5
8	219.1	127	304.8	203.2	609.6	406.4	414.3	312.7
10	273.1	158.8	381	254	762	508	517.7	390.7
12	323.9	190.5	457.2	304.8	914.4	609.6	619.3	466.9
14	355.6	222.3	533.4	355.6	1066.8	711.2	711.2	533.4
16	406.4	254	609.6	406.4	12192	812.8	8128	609.6
18	457.2	285.8	658.8	457.2	1317.6	914.4	914.4	685.8
20	508	317.5	762	508	1524	1016	1016	762
22	558.8	342.9	838.2	558.8	1676.4	1117.6	1117.6	838.2
24	609.6	381	914.4	609.6	1828.8	1219.2	1219.2	914.4
26	660.4	406	990.6	Note 1) The long radius elbow in the table is taken from ASME/ANSIB16.9 and the short radius elbow is taken from ASMSE/ANSIB 16.28.
28	711.2	438.2	1066.8
30	762	469.9	1143
32	812.8	501.7	1219.2
34	863.6	533.4	1295.4
36	914.4	565.2	1371.6
38	965.2	599.9	1447.8
40	1016	632	1524