Syria Stainless steel high pressure double-ended wire

Our regular stocking lengths are 50, 75, 100, 150, and 200 lengths. If you need other lengths, you need to order them with a minimum price of 300 yuan.

Category:

SyriaForged Pipe Fittings

sales@enfipipe.com

Specifications (inches)	Specification (denoted by DN)	Tube outside diameter (mm)	Thickness (Sch40)	Length (mm)	Weight (KG)	Thread length mm	Outside diameter of thread mm
1/8"	DN6	10.3	1.73	200	0.07	10	10
1/4"	DN8	13.7	2.24	200	0.13	11	13
3/8"	DN10	17.1	2.31	200	0.17	13	17
1/2"	DN15	21.3	2.77	200	0.26	14	21
3/4"	DN20	27.3	2.87	200	0.35	16	26
1"	DN25	33.4	3.38	200	0.51	19	33
1 1/4"	DN32	42.2	3.56	200	0.68	21	40
1 1/2"	DN40	48.3	3.68	200	0.82	21	47
2"	DN50	60.3	3.91	200	1.10	22	59
2-1/2"	DN65	76.0	5.16	200	1.82	27	75
3"	DN80	88.9	5.49	200	2.28	28	88
4"	DN100	114.3	6.02	200	3.25	32	113

Remarks

1. Our regular stocking lengths are 50, 75, 100, 150, and 200 lengths. If you need other lengths, you need to order them with a minimum price of 300 yuan.

2. The above thickness is the thickness, which can withstand approximately 64KG pressure. If you need a larger wall thickness or higher pressure, please contact me.

3. The threads we regularly stock include NPT (American system), which is a 60-degree taper thread, and PT (imperial system), which is a 55-degree taper thread, also known as RC/ZG/R. The imperial system is very commonly used in China and is also called water pipe thread, and the American system is very rare. Please confirm again, both are not interchangeable.

4. Our factory does not accept orders for low-quality stainless steel such as 201 and 301. We start with 304 material. Please forgive me.

5. If you need metric thread (such as I20*1.5), it needs to be customized. The minimum order amount is 300 yuan.

6. If you need G thread, it needs to be customized. The minimum order amount is 300 yuan. Some G external threads can be replaced with PT (imperial) threads. The external PT thread can be connected to the internal thread G, but the reverse cannot be used.

7. The geometric dimensions are manufactured according to ANSI B36.10, B36.19 and B16.9. Thread manufacturing is BSPT (IS07/1), NPT (ASME B1.20.1)